Produkte von EM Test
Für die Filterung wurden keine Ergebnisse gefunden!
EM Test CWS 500N
The CWS 500N1.3 and CWS 500N1.4 are compact
single box test equipment for testing conducted RF
immunity per IEC 61000-4-6 Ed.3 and Ed.4 and
related standards. with a frequency range between
10 kHz to 400 MHz. Apart from the 1 kHz 80 %...
EM Test LD200
Load Dump pulses simulate the sudden disconnection (e.g. by corrosion) of the battery from the alternator while the alternator is generating current to load the battery. Such Load Dump pulses are high energy pulses with a high potential...
EM Test PFS200N
The PFS 200N Automotive Power Fail Simulator is used to comply with standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips and drops (micro-interruptions).
Some standards specify very fast rise and fall...
EM Test VDS200Q
Voltage up to 60 V, 2 ranges
80 V Extended Option
Current up to 200 A (600 A peak)
Four quadrant, bipolar amplifier
Fast step response time
Very Low Ri: <10 mOhm (Programmable 10 - 200 mOhm)
High Bandwidth up to 250 kHz...
EM Test CALV124.1
Beschreibung
Calibration kit for PFM 200N200 with calibration loads as per LV124, VW 80000, E10 and E13 for supply lines - CA LV124-P1R: 1 Ohm/50W, 1%, - CA LV124-P100R: 100 Ohm/50W, 1% for data lines - CA LV124-D1R: 1 Ohm/1W, 1%, - CA...
EM Test MPG200
Micropulses occur on the battery supply system when an inductive load is disconnected from the DC supply. These pulses are of a medium energy content having a rise time in the low microsecond range and a duration of several tenth or...