The 80I-110s AC/DC Current Clamp is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001. Features Current Range: 0.1 to 100 A DC or 0.1 to 70 A AC Basic Accuracy (DC to 1kHz): 100mV/A setting= 50mA to 10A +/- 3% of reading + 50mA, 10mV/A setting= 50mA to 40A +/- 4% of reading + 50mA, 40A to 80A +/- 12% of reading + 50mA, 80 to 100A +/- 15% of reading. Output Signal: 10A range: 100mV/A, 100A range: 10mV/A Bandwidth: 1Hz to 20kHz Working Voltage: 600V AC rms Maximum Conductor Size: 11.8 mm (.46 inch) diameter Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V.