Products from Anritsu
No results were found for the filter!
Anritsu 560-98KF50
Anritsu 560-98KF50 Autotester, 10 MHz-40 GHz, K(f), Directivity = 35 dB ( = 26.5 GHz), 50 Ohm
Anritsu MN510D1
N-connector. Variable Attenuator 0-91 dB in 10 dB, 1 dB und 0,1 dB Steps, DC to 500 MHz, 2 x BNC Input to max.24 dB, for Lab. use all in one box, 75 Ohm.
Anritsu MP1777A
The MP1777A is a measurement solution for jitter evaluation. It supports both the STM-16/32/64 and OC-48/96/192 bit rates. In addition to supporting the bit rates of 2488.32, 4976.64, and 9953.28 MHz four additional bit rates used in...
Anritsu MG921A
ANRITSU MG 921 A Stabilisierte Lichtquelle (S.M.F. LD) für Multi-Mode / Single-Mode-Fasern Wellenlängen-Bereich 1,3 µm optischer Anschluss FC/PC
Anritsu MS2702A
The Anritsu MS2702A spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities....
Anritsu MA24104A
The Anritsu MA24104A Inline High Power Sensor is designed to take accurate average power measurements from 600 MHz to 4 GHz and power levels from 2 mW to 150 W. The sensor employs a "dual path" architecture that enables True-RMS...
Anritsu MG923A
ANRITSU MG 923 A Stabilisierte Lichtquelle (S.M.F. LD) für Multi-Mode / Single-Mode-Fasern Wellenlänge 1,55 µm ± 0,03 µm spektrale Bandbreite Modulation intern 270 Hz ± 1% extern DC bis 3 kHz optischer Anschluss FC