EM Test PFS200N
The PFS 200N Automotive Power Fail Simulator is used to meet standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips and drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond and an electronic switch. While for drop-outs (from nominal voltage value to 0 V) only one DC source is needed, for voltage dips (reduction of voltage level to other levels than 0 V) two DC voltage supplies are required. The output voltage of the second supply (PF2) can be controlled via the 0-10 V analog output on the PFS 200Nx unit. As a second DC supply, we recommend the RDS 200N1 unit. Operation of the generator is possible both manually from the front panel and via the remote software iso.control. In standard mode, the remote software tool offers a wide variety of preprogrammed tests. In device mode, you have a similar ability to modify the parameters as when operating from the front panel. The PFS 200N units can also be easily integrated into a complete test setup with more EM Test automotive transient generators. Automotive Power Fail Simulator 80 VDC / 30/50/100 A
Product variants:
-
EM Test PFS200N
