Products from Keysight (Agilent/HP)
No results were found for the filter!
Keysight (Agilent/HP) 16023B
The Agilent / HP 16023B is a DC Bias Controller that is used with the 4274A or 4275A Multi-Frequency LCR Meters. It is used for control of DC bias Option 001 or 002 Internal Bias Supply when the HP-IB option is not installed.
Keysight (Agilent/HP) 11890A
The Agilent 11890A is a 3 port directional coupler with a nominal coupling of 3dB and 34dB nominal directivity. It is used with the 8702E lightwave component analyzer.
Keysight (Agilent/HP) 60503A
Electronic Load for use with HP 6050 A mainframe Ranges : 3-240 V, 0-10 A, 250 W Analog programming bandwidth of 10 kHz (-3 dB frequency) Analog programming accuracy of 4.5% ±8 mA (low range) and 4.5% ±20 mA (high range)
Keysight (Agilent/HP) 86207A
The HP / Agilent 86207A high directivity 75 ohm RF bridge offers unparalleled performance in a variety of general-purpose applications. It is ideal for accurate reflection measurements and signal leveling applications.
Keysight (Agilent/HP) 59307A
2 über Drucktasten an der Frontplatte oder HP-IB steuerbare HF-Umschaltrelais mit jeweils 1 Eingang und 4 Ausgängen, verwendbar bis über 500 MHz. Impedanz 50 Ohm.
Keysight (Agilent/HP) K281C
Waveguide - Coax Adapter, K-Band, 18.0 - 26.5 GHz. WR42 to 3,5 mm (f), VSWR <1.07.
Keysight (Agilent/HP) 86632B
The 86632B Modulation Section Plug-In provides AM and FM modulation when used with RF section in 8660-series Generators. Internal 400Hz and 1kHz modulation provided. A switch selects ac or dc coupling of external modulation inputs. A...
Keysight (Agilent/HP) 89411A
The HP / Agilent 89411A is a used Network Analyzer Downconverter. It works with the Agilent HP 89410A to provide narrowband vector signal analysis at RF and microwave frequencies. Converts a 21.4 MHz IF output from an external receiver...