Products from Tektronix
No results were found for the filter!
Tektronix P6015
The P6015 High Voltage Probe requires voltage or duty cycle derating for RF voltages at frequencies over 100 kHz, or in temperatures above 25°C. Features X1000 attenuation for scope measurements up to 13 kV peak 100 MO input resistance 3...
Tektronix 1241
Konfigurierbar auf bis zu 72 Kanäle /50 MHz oder 36 Kanäle / 100 MHz, zeitkontrollierte Darstellung zweier unabhängiger Datenströme, 8-, 16- und 32-bit-Prozessor-Unterstützung, Demultiplex-Betrieb, 14 Triggerebenen, Menü-Steuerung und...
Tektronix TDS2002C
The TDS2000C Digital Storage Oscilloscope Series provides you with
affordable performance in a compact design. Packed with standard
features - including USB connectivity, 16 automated measurements, limit
testing, data logging, and...
Tektronix P3420
The Tek / Sony P3420 is a Variable Data Output Pod Module for the Tektronix DG2020A Data Pattern Generator.
Tektronix A1002
The A1002 fits the 370 and 371 tracers.
The A1002 Opt. 01 (5 instead of 6 interconnect pins, no Kelvin connection for the base terminal) fits the 576 and 577 tracers.
Compatible with 576 577 370 371
Tektronix 067-0589-00
The Tektronix 067-0589-00 Rigid Plug-In Extension is used for operating 7000-series plug-ins outside the mainframe for repair, maintenance and calibration. It is based on a printed circuit board and has a guide rail holding a...
Tektronix 1481R
The 1481R PAL Waveform Monitor features bright CRT which is especially suitable for vertical interval testing, advanced measurement modes, amplitude measurement accuracy approaching 0.2%, digital selection of line and field and 15 line...
Tektronix VX4353
The Tektronix VX4353 Relay Switching Module is a printed circuit board for use in a mainframe conforming to the VXIbus specifications, such as the VX1400 “C” size mainframe used in the Tektronix / CDS IAC system. The Module provides 32...
Tektronix P6021
For general purpose applications, the P6021 Current Probe provides wide-band performance with excellent low-frequency characteristics. Bandwidth is 120 Hz to 60 MHz. The passive termination is switchable from 2 mA/mV to 10 mA/mV....