Products from Tektronix
No results were found for the filter!
Tektronix TDS3TMT
TDS 3TMT – Telecom Mask Testing Application
Module. Adds Pass/Fail mask testing for compliance to
telecommunications standards:
• ITU-T G.703 (DS0, DS1, E1, Clk Interface, DS2, E2, E3,
and DS3 rates)
• ANSI T1.102 (DS1, DS1A, DS1C, DS2,...
Tektronix TSG601
It produces a 270 Mb/s CCIR 601 Component 525/625 data stream (525/60 or 625/50 with 8 or 10 bits data, scrambled NRZI) into a 75 ? output. It can be used together with the SDA601 hand-held SDI analyzer.
Tektronix TDS3VID
Video Module, for use with TDS 3000 Series. Video QuickMenu, Autoset, Holdoff, Line Count Trigger, Video/vectorscope modes, Graticules.
Tektronix TDS460A
Be confident you are seeing actual Signals with up to 400 MHz bandwidth and ±1.5% accuracy Capture transient events to the full scope bandwidth with its 100 MS/s sample rate 4 channels Record lengths to 120 K (Opt. XL) Floppy Disk...
Tektronix TDS3034
The TDS3000 oscilloscopes are the lowest priced, most portable Digital Phosphor Oscilloscopes (DPOs). Now every design engineer and technician can take advantage of the tremendous benefits of DPOs. DPOs deliver a new level of insight...
Tektronix 2440
The 2440 is a 2 Channel, 300 MHz, Digital Oscilloscope. It combines high bandwidth and sampling rates with powerful automation features and waveform processing capabilities. Measurement accuracy is 8-bits vertical (11-bits with...
Tektronix P6133
150 MHz Passive Probe, 10X Attenuation, 12.7 pF, 10 MOhm, 2 m, 150 VRMS, with Readout.
Tektronix 2215A
Analogic oscilloscope, 60 MHz, two channels, double time base, 2 mV/div, up to 50 ns/div, 1 MOhm input impedance, tube 8x10 cm, portable.
Tektronix SD-26
The SD26 Sampling Head is a dual-channel, 20 GHz equivalent bandwidth sampling head. This sampling head has the same acquisition capability as the SD24 TDR/Sampling Head but does not include the TDR step generators.
Tektronix P6205
The P6205 FET Probe has an attenuation of 10X and a bandwidth at -3dB of 750MHz. System Input Resistance: 1 Mohm Typical Input C: 2.0pF Max Voltage: ±40 V Probe Power Supply Needed for 2200/2400, and TDS 300 Scopes: 1103 Scope...